Uses, Types & Advantages of PU Dispersions

Water Based PU Dispersions from Bansal Trading Company

In the field of aqueous-based polyurethanes, [POLYURETHANE DISPERSIONS], we are perhaps the pioneers in India, that complete the chain of Manufacturing the PUDs, from the designing and synthesis of the backbone polyol, to the finished product customized for end use application. We are focused on serving our customers, with a close partnership and delivering world class products. Made in India. like: Aliphatic Single Pack Self Cross Linking Water Borne Polyurethane Dispersion.

PU Dispersions: This water based solution coatings comprise specialty products ranging from soft to hard, from anionic to cationic, from normal to highly resistant to hydrolysis, from soft to scratch-resistant, from hydrophobic to hydrophilic, from non-swelling to breathable PU polyurethane dispersion a tough balancing act today for coating formulators and end users. Increasingly stringent environmental regulations call for low-VOC products, but one still has to meet the technical requirements for the coating for a variety of substrates. Polyurethane dispersions water borne based coatings are an alternative approach to producing polyurethane coatings and adhesives that are low in VOCs.

PUDS are used in a variety of technical and industrial applications, such as Industrial/Auto and Decorative coatings, wood coatings, leather and PVC leather, adhesives, inks, plastic etc. These products have an ever growing and vast sphere of application. Our products are constantly analyzed and updated to optimize and enhance polymer properties for specific applications, ranging from abrasion resistance to softness of hand.  Please find your industry sector and select from the Bansal Trading Company product range the chemicals we can supply. Please consult our sales or technical representative for helpful advice.

What makes water-borne-based polyurethane dispersion coatings so unique?

• low solvent content (or in many cases solvent-free).
• low odour.
• low viscosity at high molecular weights.
• many options for one component (1K) applications.
• low-temperature drying.
• excellent polyurethane performance.
• superior adhesion to a wide variety of substrates.

ADVANTAGES AND U.S.P. OF OUR PRODUCTS

1. EMULSION CONTAINS SURFACTANTS WHEREAS PUDS DO NOT CONTAIN SURFACTANTS. HENCE, THE WATER SENSITIVITY OF EMULSIONS IS HIGHER THAN DISPERSIONS.
2. IT’S A TOUGH BALANCING ACT TODAY FOR COATING FORMULATORS AND END USERS. INCREASINGLY STRINGENT ENVIRONMENTAL REGULATIONS CALL FOR LOW-VOC PRODUCTS, BUT YOU STILL NEED TO MEET THE TECHNICAL REQUIREMENTS FOR THE COATINGS.
3. POLYURETHANE DISPERSIONS ARE AN ALTERNATIVE APPROACH TO PRODUCING POLYURETHANE COATINGS THAT ARE LOW IN VOCS.

SELF CROSS-LINKING

EXCELLENT STAIN RESISTANCE

SUPERIOR ADHESION TO A WIDE VARIETY OF SUBSTRATES

CYCLOALIPHATIC POLYURETHANE

GOOD WEATHER ABILITY

GOOD GLOSS RETENTION

SINGLE PACK

PACKING COST IS REDUCED

PLASTIC CANS CAN BE USED

WATER BASED

LOW VOC

LOW ODOUR

LOW TEMPERATURE DRYING

FREE FROM INSTABILITY IN COST OF SOLVENTS

FAST GROWING AND POPULAR SEGMENT

MADE IN INDIA

LOW COST ALTERNATIVE TO IMPORTS

NO TRANSPORTATION/IMPORT DUTIES ON WATER

STABILITY IN PRICES DUE TO LESS EFFECT OF CURRENCY FLUCTUATIONS

LESS STOCKS AND FASTER DELIVERIES

Uses and end applications of water based PU Dispersions

• Automotive refinishing
• Industrial coating
• Coil/can coating
• Wood/furniture coating
• Ready To Use Wood Coating
• Plastics coating
• Parquet
• Leather/PVC Leather Coating
• Woven Textiles, Nylons and Polyesters
• Paper and Ink
• Glass Coating
• Concrete and Asbestos
• Heavy-duty corrosion

Application Procedure for Finished Wood Coatings 3601-2-3 from our company. Call for samples of finished ready to use coatings.

SAND THE WOOD WITH 120 EMERY PAPER

DILUTE AE-3601 (SANDING SEALER) WITH 10% DI-MINERALISED WATER

APPLY A THIN COAT OF THIS DILUTED AE-3601 SEALER

ALLOW IT TO DRY FOR 4 HOURS AT 20 ° C, OR IF TEMPERATURE IS LOW, DRY OVERNIGHT

SAND THE COATED WOOD WITH 220 EMERY PAPER

APPLY SECOND COAT OF SANDING SEALER DILUTED AE-3601 (PROCEDURE 3 AND 4)

SAND THE COATED WOOD WITH 320 EMERY PAPER

APPLY THIRD COAT OF SANDING SEALER DILUTED AE-3601 (PROCEDURE 3 AND 4)

SAND THE COATED WOOD WITH 600 EMERY PAPER

TOP COAT

FOR GLOSS TOP COAT AE-3602 (DILUTE WITH 10% DI-MINERALISED WATER)

FOR MATT TOP COAT AE-3603 (DILUTE WITH 10% DI-MINERALISED WATER)

APPLY FINAL TOP COAT OF AE-3602 (GLOSS COAT) OR AE-3603 (MATT COAT)

ALLOW IT TO DRY

FOR GLOSS FINISH

SAND THE COATED WOOD WITH 2000 EMERY PAPER, AFTER 48 HOURS

BUFF THE COATED WOOD WITH 3M PROTECT –IT 1 STEP POLISH

MATT FINISH-NO FURTHER STEPS